Configure, Verify and Test IS-IS for IPv6

[Eduardo Brito da Cunha]

Hello Team,

Good point, 😀

<b data-start="”167″" data-end="”233″"><strong data-start="”171″" data-end="”233″">IS-IS does not require protocol changes to support IPv6

OSPF needed a new protocol version (<strong data-start="”270″" data-end="”280″">OSPFv3) to support IPv6.<br data-start="”298″" data-end="”301″"> IS-IS only needed a new TLV (Type-Length-Value).<br data-start="”349″" data-end="”352″"> The base IS-IS protocol remained the same.

[Kumbirai Andrew Mawisire]

Describe how IPv6 IGP & EGP routing differs from IPv4 …can you help

[Kumbirai Andrew Mawisire]

Describe how IPv6 IGP & EGP routing differs from IPv4 …can you help please

[Kumbirai Andrew Mawisire]

Describe how IPv6 IGP & EGP routing differs from IPv4

[Kumbirai Andrew Mawisire]

Describe how IPv6 IGP & EGP routing differs from IPv4 …can you help….

[Vincent Onyango]

I don’t think there is a big deference on the 2