No, you cannot directly liken EUI-64 to an IPv4 private/local IP address because they serve different purposes: EUI-64 is a method for generating the host-specific part of an IPv6 address (the Interface ID), while IPv4 private addresses are blocks of network-specific addresses for local networks. A better comparison for EUI-64 would be the…

Read more

To implement a manual IPv4-in-IPv6 tunnel, configure a tunnel interface on border routers at both ends of the connection, define the tunnel source and destination IPv4 addresses, and set the tunnel mode to ipv6ip. You will also need to configure an IPv6 address on the tunnel interface and set up routes so that traffic destined for the other…

Read more

To implement a manual IPv4-in-IPv6 tunnel, configure a tunnel interface on border routers at both ends of the connection, define the tunnel source and destination IPv4 addresses, and set the tunnel mode to ipv6ip. You will also need to configure an IPv6 address on the tunnel interface and set up routes so that traffic destined for the other…

Read more

To implement stateless DHCPv6, you must enable IPv6 routing, configure a DHCPv6 pool with the necessary options (like DNS servers and domain name), and then apply that pool to the interface using the <code jscontroller=”PR9Qj” jsuid=”O0ipId_a” data-processed=”true”>ipv6 dhcp server command. Additionally, you must enable the … Read more

quite amazing how SLAAC works

thank for the great explanation

Thank you for great the explanation

thank you for the explanation

great explanation thank you

great course indeed especially when knowing its the reality we have to face