Configure, Verify and Troubleshoot IPv6 on MacOS

[Samuel Mwamsaku]

On mac os, click on the Apple menu, then click on the system preferences, then network, then click on TCP/IP.

• Automatically: Enables automatic configuration of IPv6 addresses.
• Manually: Allows you to manually input the IPv6 address, prefix length, and router information.

[Benjamin Kamau]

Hi. I’m unable to proceed after the Configure, Verify and Troubleshoot IPv6 on MacOS lesson. Page doesn’t prompt me to continue and jumping to the next one gives an error message indicating that I have to complete the previous module.

[Nzioka Mutunga]

Click on the hamburger icon to manually select the next lesson

[Charles Msenye]

I’m unable to proceed after the Configure, Verify and Troubleshoot IPv6 on MacOS lesson. Page doesn’t prompt me to continue and jumping to the next one gives an error message indicating that I have to complete the previous module.

[Andrew Ikpefua]

<b data-start="”161″" data-end="”188″"><strong data-start="”170″" data-end="”188″">Configure IPv6

macOS supports both <strong data-start="”210″" data-end="”233″">automatic (default) and <strong data-start="”238″" data-end="”248″">manual IPv6 configuration.

• Click <strong data-start="”506″" data-end="”548″">Apple Menu → System Settings → Network.

• Select your active interface (e.g., <strong data-start="”591″" data-end="”600″">Wi-Fi or <strong data-start="”604″" data-end="”616″">Ethernet).

• Click <strong data-start="”630″" data-end="”641″">Details (or <strong data-start="”646″" data-end="”658″">Advanced on older versions).

• Go to the <strong data-start="”694″" data-end="”704″">TCP/IP tab.

• Under <strong data-start="”721″" data-end="”739″">Configure IPv6, choose <strong data-start="”748″" data-end="”765″">Automatically (default).

• Click <strong data-start="”788″" data-end="”802″">OK → Apply.

[Vincent Onyango]

thanks

[Son Twongyirwe]

I am unable to continue what could be the issue

[samson Mawisire]

double check if you have not missed or omitted a certain part in the lesson. especially where it says click on the highlighted to get more details, if you do not you will not be able to proceed

[BIANCA WAIRIMU]

I completed Lesson 7: Configure, Verify, and Troubleshoot IPv6 on macOS, but the system won’t let me proceed to Lesson 8: Configure, Verify, and Troubleshoot IPv6 on Linux.

I also haven’t received my course certificate. Could you please assist?

Thank you

Bianca Wairimu

[DJIM MONTEIRO]

Concluí a Lição 7: Configurar, Verificar e Solucionar Problemas de IPv6 no macOS , mas o sistema não me permite prosseguir para a Lição 8: Configurar, Verificar e Solucionar Problemas de IPv6 no Linux .

[DJIM MONTEIRO]

[Abdiwahab Adan Yacqub]

How can I get the PDF of this course IPv6 Training book?