-
Implement Manual Tunnelling | IPv6-In-IPv4
✌🏾The conversation starts here…..
-
5 Réponses
-
5
HPs
0
QPs
103
XPs
These videos are way too fast to catch up for learners. The speed should be a max of x1 (normal)
-
35
HPs
0
QPs
1569
XPs
The replay button can be used to repeat the clip that is not clear or fast.
-
35
HPs
0
QPs
1569
XPs
My question is that it is possible to go over the course after completion to revise for the final certification exam.
-
45
HPs
0
QPs
2040
XPs
Please can the training platform be left accessible for sometime after the challenge?
-
200
HPs
6
QPs
2719
XPs
To implement a manual IPv4-in-IPv6 tunnel, configure a tunnel interface on border routers at both ends of the connection, define the tunnel source and destination IPv4 addresses, and set the tunnel mode to ipv6ip. You will also need to configure an IPv6 address on the tunnel interface and set up routes so that traffic destined for the other IPv6 network is directed through the tunnel
Connectez-vous pour répondre.