Homepage Forums IPv6 Learning Lounge Mastering IPv6 Transition Mechanisms Implement Manual Tunnelling | IPv4-In-IPv6

Étiquetté : 

  • samson Mawisire

    Membre
    novembre 26, 2025 à 9:37 am
    200 HPs
    6 QPs
    2719 XPs

    To implement a manual IPv4-in-IPv6 tunnel, configure a tunnel interface on border routers at both ends of the connection, define the tunnel source and destination IPv4 addresses, and set the tunnel mode to ipv6ip. You will also need to configure an IPv6 address on the tunnel interface and set up routes so that traffic destined for the other IPv6 network is directed through the tunnel

Connectez-vous pour répondre.