-
How SLAAC Works
✌🏾The conversation starts here…..
-
6 Replies
-
135
HPs
0
QPs
0
XPs
Stateless Address Autoconfiguration (SLAAC) is an IPv6 mechanism that allows devices to automatically configure their own IP addresses without the need for a DHCP server. Here’s how it works
- ICMPv6 RA: Routers periodically send ICMPv6 Router Advertisement (RA) messages on the network, or they respond to Router Solicitation (RS) messages from devices seeking network configuration information.
- RA Contents: The RA contains information like the network prefix, the A flag (Autonomous Address Configuration), and the L flag (On-link). These indicate whether SLAAC is allowed for address generation and if the prefix can be used for direct communication within the link.
-
200
HPs
6
QPs
2719
XPs
Thank you for the explanation
-
150
HPs
0
QPs
2399
XPs
Anyone else having this error?
-
150
HPs
0
QPs
2399
XPs
It’s working now. I cleared the browser cache.
-
110
HPs
2
QPs
1995
XPs
Thanks now i know , i was also there but left and restart my system and changed internet sources.
Regards and thanks
-
-
110
HPs
2
QPs
1995
XPs
Noticed on The SLAAC module i finished and saw 0 points i have to restart again and moved back to go through the module once again before i was awarded the 60 marks, i have seen several like this but now i have to check . This might be the reson some have more points that the other in same module milestones. Please check and ensure you take your points
Log in to reply.